HOW TO BUILD ACOUSTIC AUDIO ROOM



Build an Acoustic Audio Room is not a difficult work. We can do it ourselves. And this place is an critical place for audiophiles. Commonly acoustic audio room built for home party or karaoke room. When we fool around a good audio complement in your vital room, we will not attend to a good receptive to advice out of your system. Without Acoustic Audio Room we will never attend to a genuine receptive to advice from your system. Cause roughly of vital room not written as an acoustic room. An acoustic audio room written with receptive to advice thoughtfulness roughly none. Without thoughtfulness we will attend to your audio complement furnish a genuine sound.

This is my knowledge when we set up my audio room.

First we have to confirm where a a single of my room to set up as audio room is. we consider it’s improved to set up it upon second building of my house. Fortunately this thought comes up when we set up my brand new house. So we have an unprepared dull room upon second building to build. we select second building since a outcome will reduction waste than upon initial floor. It will not be a complaint for my neighbor.

Second, we buy multiform materials. The materials have been plywood, rockwool, vale gybsum board, timber as well as multiform nail. You can buy plywood with 0,5” – 1,5” thickness. Thicker is better. Rockwool is essential element to revoke audio thoughtfulness effect. It’s about 3” density with yellow color. With 1m x 1m dimention, a package in a bulk enclose 10 pieces. Hollow gybsumboard is a house done from gibsum with multiform holes with 4 feet x 8 feet dimention. By this hole a receptive to advice will trought to a rockwool to revoke a thoughtfulness effect. And a final have been timber club as well as spike to have support of board.

Third, begin to build. we tighten all wall, roof tiles as well as building with plywood by spike its. Then set up support to set vale gybsumboard. Set a timber club to plywood with 4 feet stretch (see figure). Fill spaces in between timber club with rockwool. Then tighten it with vale gybsumboard. And we can finish it by paint it with tone as we want.

And right away we can set up your acoustic audio room yourself. Enjoy a genuine as well as transparent receptive to advice but thoughtfulness effect.

You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

5 Comments on “HOW TO BUILD ACOUSTIC AUDIO ROOM”

  • 6 April, 2009, 11:48

    I’m interested, how much would it cost to build the acoustic room?

  • 7 April, 2009, 11:47

    Thank you for your attention in this page. The cost will be posted next several days. Check out this blog when you connected always

  • 10 April, 2009, 15:34

    “How to Build Acoustic Audio Room, Just subscribed to your feed. This has been a great read and a help; especially in the current economic climate.

  • 20 April, 2009, 8:16

    Not sure that this is true:), but thanks for a post.
    Have a nice day

  • 5 May, 2009, 4:48

    Awesome, i really enjoyed reading your post.

Leave a Comment